Home . Articles . News . Technique . Reduce the roll

Reduce the roll

2021 November 1

Take some motion out of the ocean for a good night’s sleep at anchor

Every time we post a photo of our boat at anchor we immediately get asked “What’s that off of your spinnaker pole?” The answer is simple: it’s insurance that we will get a good night of sleep. 


Our 41-foot 1979 Cheoy Lee Avocet is a steady boat due to her stout, deep tumblehome design that takes her curves well below the waterline. Despite her relatively wide beam and comfortable layout, we still fall victim to the rock and roll of the ocean’s swell at anchor which can be one of the most miserable experiences a crew can suffer. To remedy the unbearable and not-so-gentle anchorage conditions we can always rely on our roll reducer, more commonly known as a “flopper stopper” to help slow the roll up to 50% and return a sense of comfort on the hook. 


The 41-foot Cheoy Lee Avocet uses a roll reducer set off a spinnaker pole to create a mechanical advantage for the system and help the crew get a better night’s sleep at anchor.
Many monohull owners like ourselves use some variation of a roll reducer at anchor ranging from mass-produced systems to homemade DIY units that all work with the same principle in mind. A good roll reducer is designed to sink rapidly then resist quick upward motion, which overall results in slowing the roll imposed by the swell. Some flopper stopper designs achieve this with their shape alone, but some units fold or open during descent and shut during upward motion which provides the resistance aspect. 


The best system and deployment method will vary from boat to boat and be dependent on budget, but there are several ways to rig a roll reducer. 


Types of  roll reducers


Perhaps the cheapest option of all the flopper stoppers we have seen would have to be a 5-gallon bucket. There are a lot of DIY options out there for this concept since the materials are easily obtainable and the application is simple. The common method is to drill numerous holes in the bottom of a 5-gallon bucket and add some weight. The weight in the bucket causes it to sink, allowing water to flow through the holes. When the boat rolls and the bucket is lifted, the resistance will theoretically slow the roll. However, some sailors say the buckets can reach an equilibrium of sorts, with no deflection or drag, causing them to float around, lifting and falling with each swell. 


The key to the 5-gallon bucket method, and really all roll reducing methods,  is a lot of weight. A benefit of this simple flopper stopper is that the buckets can be stowed relatively easily and hold other items when not in use. 


Although you can use nearly any malleable and marine resistant metal (or treated wood), sailors around the globe swear by the aluminum sheet flopper stopper. Kleanthis Anastasakia, who owns a Nicholson 38, uses a 5-millimeter-thick aluminum sheet, cut to about 3-feet square with rounded corners. He then attaches three lines to each corner and connect the lines to a swivel leading to a single line. The system is deployed off the beam of the boat from the end of the boom.

Continue reading: Page 1 | Page 2 | Next